Straight answers to the questions we’re asked most. If yours isn’t here, call 01792 550090 (Mon–Fri, 9am–5pm) or send it with the free estimate form.

Cost and estimates
How much does a resin driveway cost?
Resin driveways start from about £2,464 inc VAT in the Swansea area, based on a small patio overlay on sound tarmac or concrete. Bigger areas, travel, reinforcing mesh and dig-outs cost more. What affects the price
How do I get a price?
Send the short estimate form with your postcode, rough size and what’s there now, plus a photo if you can. Our estimating team emails your estimate, usually the same working day. Evening and weekend requests go out the next working day.
Is the estimate free?
Yes. The estimate and the site visit are free and there’s no obligation.
Planning and rules
Do I need planning permission for a resin driveway in Wales?
Usually not. Resin bound stone is permeable, so rainwater soaks through rather than running onto the road. Check with your council if your home is listed, in a conservation area or in a protected landscape such as Gower.
Do I need permission for a dropped kerb?
Yes. A new or wider dropped kerb needs the council’s approval, separately from the driveway itself.
What about SuDS rules?
Larger new-build schemes in Wales need SuDS approval before work starts. A permeable resin surface on a free-draining base can help. SuDS guide
The surface
What is resin bound stone?
Dried natural stone mixed with a clear resin and trowelled smooth. The stones are locked together into a solid but slightly flexible surface that water can drain through.
What’s the difference between resin bound and resin bonded?
Resin bound (what we lay) mixes the stone and resin before it goes down, so the stones are held all the way through and the surface drains. Resin bonded is resin spread on the ground with loose stone scattered on top. It doesn’t drain and can shed stones over time.
How thick should a resin driveway be?
We lay 18 mm as standard. On commercial areas used by heavy vehicles, we lay 22 mm on request. As a rule, the layer must be at least three times the size of the largest stone in the blend. Thinner layers are more likely to fail.
Is a resin driveway slippery?
The stone gives a natural texture, and water drains through instead of sitting on top. Keep the surface clear of moss and leaves, as with any driveway.
Are your blends tested?
Yes. We use Leesons resin, the first BBA-accredited resin. Leesons have tested 27 of our blends (report LTR 3892, June 2025). Every one beat the 2 MPa minimum strength recommended by FeRFA, the resin flooring and surfacing trade body, reaching a flexural (bending) strength of 2.7 to 3.4 MPa, and every one is in the Low Slip Potential category on the wet pendulum test. PlyCore, with mesh top and bottom, averaged 8.4 MPa. In Leesons’ own comparison in December 2024, their UV-stable resin was about 30% to 75% stronger in bending than two competitors’ resins laid with the same stone.
Will it fade or go yellow?
We use at least 7% UV-stable resin, which helps protect the colour. Cheaper non-UV-stable resins can yellow in the sun. The stone itself is natural, so any change is slight.
Does water drain through?
Yes. Rain soaks through the resin. On a permeable base it carries on into the ground. On an overlay it drains through the resin, then runs off the old surface underneath, as it does now.
Laying over what’s there now
Can resin be laid on concrete or tarmac?
Yes, if it’s solid, level and free of cracks, sinking or loose areas. Small cracks can often be repaired and reinforced first. Overlay or full dig-out
Can you lay resin over block paving?
No. Block paving isn’t cemented down. The blocks sit on sand, dust or glass bedding, which wears and moves when you jet wash it or in heavy rain, so resin laid on top would crack. If the sub-base underneath is good, we lift the blocks and lay an aRBee reinforcement layer before the resin top coat: MeshEase (a single mesh) or PlyCore (30 mm of resin bound stone sandwiched between two layers of mesh). Why we don’t overlay block paving
What if my drive is gravel or soil?
We dig it out and lay a new compacted base first. It costs more than an overlay, but you end up with a solid driveway that drains.
See a full dig-out, step by step, with photos
Can you lay resin on a sloping drive?
We can lay resin on slopes. We adjust the mix and finish for steep drives, and we’ll talk you through it at the estimate.
Timing and weather
How soon can I walk or drive on it?
You can walk on it after 8 hours and drive on it after 24 hours.
Can you lay resin in winter or in the rain?
We lay when it’s 5°C or above and dry. Rain or cold on the day means we rearrange. You can still get your estimate and book a date over the winter.
How long does the job take?
It depends on the size and the base, and dig-outs take longer. We work on one site per day, so your job gets our full team. Your quote will say how long to allow.
Looking after it
How do I clean a resin driveway?
Sweep it regularly and clear leaves so they don’t stain. Now and then, wash it with a hose or a light pressure wash, keeping the pressure moderate. Use a diluted patio cleaner if needed, and avoid harsh acid or alkaline cleaners. Cleaning guide
Do weeds grow through?
Weeds are uncommon because there are no joints. Seeds can land in dirt or moss on top. A brush or a gentle wash clears them.
Can a resin driveway be repaired?
Yes. Small areas of damage can be cut out and patched with a matching mix. Repair guide
How long does a resin driveway last?
That depends mostly on what’s underneath it. A solid base, the right depth, UV-stable resin and simple cleaning all help it last. We check the base on every job, and if it isn’t sound we’ll tell you.
The downsides, honestly
What are the disadvantages of a resin driveway?
- It needs a solid base. Laid over a poor surface, it can crack.
- It costs more than loose gravel. It’s about the same price as decking, block paving or patio slabs, and around one and a half times the price of tarmac.
- It can only be laid in dry weather at 5°C or above, so winter dates depend on the forecast.
- An overlay on a non-permeable surface isn’t fully permeable.
We’d rather tell you this before you buy than after.
About Erinstone
Where do you work?
Swansea, Gower and Mumbles, Neath, Port Talbot, Llanelli, Carmarthen and West Wales, Bridgend, Cardiff and the South Wales Valleys. We’re based in Swansea and come to you; there’s no showroom.
When can I call?
Mon–Fri, 9am–5pm on 01792 550090. We’re closed for calls at weekends, but you can email sales@erinstone.co.uk or send the form any time.
Accessible access
Is resin bound suitable for wheelchair access?
Yes, where the falls and flush joins are designed properly. It’s a joint-free surface that can meet thresholds flush.
Is resin bound slippery when wet?
Our blends are tested for slip resistance, and all fall in the Low Slip Potential category. Glass grit is standard on every topcoat.
Can you add contrast for visually impaired people?
Yes. We can fit high-contrast step nosings and use clear colour contrast between the surface and its edges where needed.
Do you work on public buildings as well as homes?
Yes. We surface pedestrian areas at museums, leisure centres, shops, care settings, schools and similar sites.
When is VAT 0%?
0% VAT applies when you qualify, typically for building a ramp or widening an existing doorway, passage or path for a chronically sick or disabled person in their own home. You sign an eligibility declaration. A brand-new driveway usually still has VAT. Ask us when we quote.
Still have a question?
Send it with the estimate form and we’ll answer it with your estimate, usually the same working day.
